ItalyAdvantages
- It is equipped with a shell-and-tube evaporator that is resistant to pollution and operates with lower losses due to the design features.
- Execution with several freon contours. This configuration provides high efficiency at partial loads.
- Environmentally friendly R410A refrigerant delivers improved performance due to higher heat capacity.
- IP54 protection class allows chiller to be installed outdoors.
- A wide range of accessories and additional equipment kits for flexible equipment of the chiller according to the needs of the client.
- The refrigeration circuit is designed to work both with hydraulic systems under atmospheric pressure and under excess pressure (up to 6 bar).
- Comprehensive protection system including: phase monitor, pressure switch, frost protection sensors, water level sensors, as well as a built-in water bypass circuit.
Standard version
- Hermetically sealed scroll compressor
- Air-cooled condenser with copper tubes and aluminum fins
- Brazed plate evaporator (S095-S160)
- Shell and tube evaporator (S190-S1360)
- Config to work with closed h4>
- Mechanical expansion valve (S095-S430)
- Automatic expansion valve (S470-S1360)
- AC axial fans
- Degree of protection IP54
- microprocessor controller
- Refrigerant R410A
Basic Options
- Execution for operation with low refrigerant temperatures (down to -10°С)
- Built-in pumps (3 bar and 5 bar)
- Standby pump
- Built-in storage tank
- Compressor inverter drive
- Soft start compressor
- Winter kit for chiller operation at negative ambient temperatures. environments
- Version of the hydraulic circuit made of stainless steel
- Expansion tank
- Hot gas bypass
- Modbus interface module, Planwatch
- Remote control panel